cbbackupmgr backup

cbbackupmgr backup

cbbackupmgr-backup - Backs up data from a Couchbase cluster

Synopsis

cbbackupmgr backup [--archive <archive_dir>] [--repo <repo_name>] [--cluster <url>] [--username <username>] [--password <password>] [--resume] [--purge] [--thread <num>] [--cacert <file>] [--no-ssl-verify] [--value-compression <type>] [--no-progress-bar] [--skip-last-compaction]

Description

Backs up a Couchbase cluster into the backup repository specified. Before running the backup command, you must create a backup repository. For more details on creating a backup repository, see cbbackupmgr config. The backup command uses information from the previous backup taken in order to backup all new data on a Couchbase cluster. If no previous backup exists then all data on the cluster is backed up. The backup is taken based on the backup repository's backup configuration. Each backup creates a new folder in the backup repository. This folder contains all the data from the backup and is named to reflect the time that the backup was started.

As the backup process runs, it tracks its progress which allows failed backups to be resumed from the point where they left off. If a backup fails before it completes, it is considered a partial backup. To attempt to complete the backup process, you can resume the backup using the --resume flag. You can also delete the partial backup and resume from the previous successful backup using the --purge flag.

The backup command is capable of backing up data when there is a cluster rebalance operation in progress. During a rebalance, the backup command tracks data as it moves around the cluster and completes the backup. However, you should use caution when running backups during a rebalance since both the rebalance and backup operations can be resource intensive and may cause temporary performance degradations in other parts of the cluster. See the --threads flag for information on how to lower the impact of the backup command on your Couchbase cluster.

The backup command is also capable of backing up data when there are server failures in the target backup cluster. When a server failure occurs, the backup command waits for 180 seconds for the failed server to come back online or for the failed server to be failed over and removed from the cluster. If 180 seconds pass without the failed server coming back online or being failed over, then the backup command marks the data on that node as failed and attempts to back up the rest of the data from the cluster. The backup is then marked as a partial backup in the backup archive and needs to be either resumed or purged when you invoke the backup command again.

Options

Below are a list of required and optional parameters for the backup command.

Required
-a,--archive <archive_dir>

The location of the backup archive directory.

-r,--repo <repo_name>

The name of the backup repository to backup data into\&.

-c,--cluster <hostname>

The hostname of one of the nodes in the cluster to back up. See the Host Formats section below for hostname specification details.

-u,--username <username>

The username for cluster authentication. The user must have the appropriate privileges to take a backup.

-p,--password <password>

The password for cluster authentication. The user must have the appropriate privileges to take a backup. If not password is supplied to this option then you will be prompted to enter your password.

Optional
--resume

If the previous backup did not complete successfully it can be resumed from where it left off by specifying this flag. Note that the resume and purge flags may not be specified at the same time.

--purge

If the previous backup did not complete successfully the partial backup will be removed and restarted from the point of the previous successful backup by specifying this flag. Note that the purge and resume flags may not be specified at the same time.

--no-ssl-verify

Skips the SSL verification phase. Specifying this flag will allow a connection using SSL encryption, but will not verify the identity of the server you connect to. You are vulnerable to a man-in-the-middle attack if you use this flag. Either this flag or the --cacert flag must be specified when using an SSL encrypted connection.

--cacert <cert_path>

Specifies a CA certificate that will be used to verify the identity of the server being connecting to. Either this flag or the --no-ssl-verify flag must be specified when using an SSL encrypted connection.

--value-compression <compression_policy>

Specifies a compression policy for backed up values. When Couchbase sends data to the backup client the data stream may contain all compressed values, all uncompressed values, or a mix of compressed and uncompressed values. To backup all data in the same form that the backup client recieves it you can specify "unchanged". If you wish for all values to be uncompressed then you can specify "uncompressed". This policy will however uncompress any compressed values received from Couchbase and may increase the backup file size. To compress all values you can specify "compressed". This will compress any uncompressed values before wiriting them to disk. The default value for this option is "unchanged".

-t,--threads <num>

Specifies the number of concurrent clients to use when taking a backup. Fewer clients means backups will take longer, but there will be less cluster resources used to complete the backup. More clients means faster backups, but at the cost of more cluster resource usage. This parameter defaults to 1 if it is not specified and it is recommended that this parameter is not set to be higher than the number of CPUs on the machine where the backup is taking place.

--no-progress-bar

By default, a progress bar is printed to stdout so that the user can see how long the backup is expected to take, the amount of data that is being transferred per second, and the amount of data that has been backed up. Specifying this flag disables the progress bar and is useful when running automated jobs.

Host Formats

When specifying a host for the couchbase-cli command the following formats are expected:

  • couchbase://<addr>

  • <addr>:<port>

  • http://<addr>:<port>

It is recommended to use the couchbase://<addr> format for standard installations. The other two formats allow an option to take a port number which is needed for non-default installations where the admin port has been set up on a port other that 8091.

Examples

The following command is used to take a backup of a Couchbase cluster.

   $ cbbackupmgr config --archive /data/backups --repo example 
 
   $ cbbackupmgr backup --archive /data/backups --repo example \ 
   --host couchbase://172.23.10.5 --username Administrator --password password 

Once the backup process is complete, there will be a new directory in the specified backup repository containing the backed up data. You can see this new directory using the cbbackupmgr list command.

$ cbbackupmgr list --archive /data/backups 
 
Size      Items          Name 
91.57MB   -              / 
91.57MB   -              + example 
91.57MB   -                  + 2016-02-11T16_35_35.796709869-08_00 
91.57MB   -                      + default 
322B      0                          bucket-config.json 
91.56MB   31569                      + data 
91.56MB   31569                          shard_0.fdb 
2B        0                          full-text.json 
10.07KB   8                          gsi.json 
1.72KB    1                          views.json 

If a backup fails then it is considered a partial backup and the backup client will not be able to back up any new data until you decide whether to resume or purge the partial backup. This decision is made by specifying either the --resume or the --purge flag on the next invocation of the backup command. Below is an example of how this process works if you want to resume a backup.

$ cbbackupmgr config --archive /data/backups --repo example 
 
$ cbbackupmgr backup --archive /data/backups --repo example \ 
--host 172.23.10.5 --username Administrator --password password 
 
Error backing up cluster: Not all data was backed up due to connectivity 
issues. Check to make sure there were no server side failures during 
backup. See backup logs for more details on what wasn't backed up. 
 
$ cbbackupmgr backup --archive /data/backups --repo example \ 
--host 172.23.10.5 --username Administrator --password password 
 
Error backing up cluster: Partial backup error 2016-02-11T17:00:19.594970735-08:00 
 
$ cbbackupmgr backup --archive /data/backups --repo example --host 172.23.10.5 \ 
--username Administrator --password password --resume 
 
Backup successfully completed 

To backup a cluster with a different number of concurrent clients and decrease the backup time you can specify the --threads flag. Remember that specifying a higher number of concurrent clients increases the amount of resources the cluster uses to complete the backup. Below is an example of using 16 concurrent clients.

$ cbbackupmgr config --archive /data/backups --repo example 
 
$ cbbackupmgr backup --archive /data/backups --repo example \ 
--host 172.23.10.5 --username Administrator --password password --thread 16 

Discussion

This command always backs up data incrementally. By using the vBucket sequence number that is associated with each item, the backup command is able to examine previous backups in order to determine where the last backup finished.

When backing up a cluster, data for each bucket is backed up in the following order:

  • Bucket Settings
  • View Definitions
  • Global Secondary Index (GSI) Definitions
  • Full-Text Index Definitions
  • Key-Value Data

Environment And Configuration Variables

CB_CLUSTER

Specifies the hostname of the Couchbase cluster to connect to. If the hostname is supplied as a command line argument then this value is overridden.

CB_USERNAME

Specifies the username for authentication to a Couchbase cluster. If the username is supplied as a command line argument then this value is overridden.

CB_PASSWORD

Specifies the password for authentication to a Couchbase cluster. If the password is supplied as a command line argument then this value is overridden.

CB_ARCHIVE_PATH

Specifies the path to the backup archive. If the archive path is supplied as a command line argument then this value is overridden.

Files

restrictions.json

Keeps a list of restrictions used to ensure data is not restored to the place.

bucket-config.json

Stores the bucket configuration settings for a bucket.

views.json

Stores the view definitions for a bucket.

gsi.json

Stores the global secondary index (GSI) definitions for a bucket.

full-text.json

Stores the full-text index definitions for a bucket.

shard-*.fdb

Stores the key\-value data for a bucket.